Dixon Steel Flow Control Valves

Description:

Series F - PF - N - MV

Coupling Category

Hydraulic Fittings

Manufacturer

Dixon Hydraulic Fittings

Series F

Two-step needle provides fine adjustments at low flow with the first three turns of the adjusting knob. The next three turns give full-open needle position and conventional throttling control. When flow is reversed, the heavy-duty poppet/retainer permits full-flow return capacity. Exclusive color-coded reference scale on the adjusting knob greatly simplifies flow setting, resetting, adjusting and return to an original flow. A simple set screw locks the valve on any desired setting.

maximum operating pressure: 5000 PSI at 70°F for 1/8" - 1/2", 3000 PSI at 70°F for 3/4" - 2" also available in brass

Thread Size Black Oxide Steel Part # 1/8" SFC200 1/4" SFC400 3/8" SFC600 1/2" SFC800 3/4" SFC1200 1" SFC1600 1-1/2" SFC2400 2" SFC3200

Series PF

Utilizes a ball type check that meters the flow of hydraulic oil in one direction and allows for free flow in the reverse direction. Recommended for use in non-shock applications.

maximum operating pressure: 5000 PSI at 70°F, 5 PSI cracking pressure also available in brass,

Thread Size Zinc Plated Steel with a dichromate seal Part # 1/4" SPF400 3/8" SPF600 1/2" SPF800

Series N

Ideal for use as speed controls on hydraulic systems where a reverse flow check valve is not needed. Provides excellent control and reliable shutoff in a very small envelope. Color-coded reference scale on the adjusting knob simplifies setting, resetting, adjusting and quick return to a previous speed setting.

maximum operating pressure: 5000 PSI at 70°F for 1/8" - 3/4", 3000 PSI at 70°F for 1" - 1-1/4" also available in brass

Thread Size Steel Part # 1/8" SN200 1/4" SN400 3/8" SN600 1/2" SN800 3/4" SN1200 1" SN1600 1-1/4" SN2000

Series MV

With these high-precision metering and shutoff valves, you can readily make fine adjustments and reset with the exclusive color code 5000 that shows when you reach the desired setting.

body components are precision-turned from solid barstock all models have 416 stainless steel needles maximum operating pressure: 5000 PSI at 70°deg;F

Thread Size Steel Part # 1/4" SMV400 3/8" SMV600 1/2" SMV800