Dixon Bi-Metal Thermometers

Description:

Models 30 - 31 - 50 - 52

Coupling Category

Air Fittings

Manufacturer

Dixon Air Fittings

• case: sturdy, corrosion resistant series 304 stainless steel case and bezel
• crystal: optically clear, strong glass, gasketed to maintain weather-tight integrity is standard
• stem: 304 series stainless steel, welded at tip and case connector to prevent leakage, 1/4" (6.35 mm) diameter is standard 
• hermetic seal: hermetically sealed per ASME B40.3 external reset: slotted-hex adjustment head offers screwdriver or wrench use to field calibrate the thermometer
• bi-metal element: an extremely responsive temperature sensing helix which has been carefully sized and tested, heat treated and aged to relieve inherent stresses and insure continued accuracy
• dampening: bi-metal helix is coated with a viscous silicone to minimize pointer oscillation and to improve temperature transmission
• immersion: for accurate temperature readings, immerse stem a minimum of 2" (50 mm) in agitated liquids or 4" (100 mm) in moving air or gas
• over range: temporary over or under range of 50% of scale up to 260°C or 500°F will not affect the instrument accuracy 
• accuracy: guaranteed to be accurate to within 1% of full scale (Grade A per ASME B40.3) (The American Society of Mechanical Engineers issued a new standard for Bi-Metal Thermometers in 1990 referred to as ASME B40.3.) Standard Connection is 1/2" male NPT

Model 30
Back Connected 3" Thermometers

Model 31
Bottom Connected 90° Angle 3" Thermometers

Model 50
Back Connected 5" Thermometers

Model 52
Adjustable Angle 5" Thermometers