Description:
Transparent Bowl - Metal Bowl
Coupling Category
Air Fittings
Manufacturer
Dixon Air Fittings
Flow Guide®
The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically
maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one
lubricator to serve several pneumatic components operating together or intermittently.
Type of oil to use:
For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which
will readily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use any synthetic oil or
oils containing additives or solvents.
|
|
| Size |
SCFM |
With Transparent Bowl |
With Metal Bowl* |
| Part # |
Part # |
| 1/4" |
35 |
L26-02A |
L26-02AMB |
| 3/8" |
60 |
L26-03A |
L26-03AMB |
| 1/2" |
128 |
L26-04A |
L26-04AMB |
* metal bowl has sight gauge with brass petcock drain
SCFM ratings at 150 PSIG inlet pressure.
|
- 10 oz. bowl
- adjustable oil feed
- can be filled under pressure
- quick disconnect metal bowl guard with integral safety latch
- The rate of oil delivery may be controlled by turning the adjusting screw counter
clockwise for more and clockwise for less oil delivery. If flow increases or decreases, the oil delivery rate
will increase or decrease proportionally.
- maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F (0°C to 65.5°C)
|
|
|
| Size |
SCFM |
With Transparent Bowl |
With Metal Bowl |
| Part # |
Part # |
| 3/8" |
176 |
L28-03A |
L28-03AMB |
| 1/2" |
184 |
L28-04A |
L28-04AMB |
| 3/4" |
200 |
L28-06A |
L28-06AMB |
SCFM ratings at 150 PSIG inlet pressure.
|
- 6.11 oz. bowl
- manual drain
- high flow capacity
- can be filled under pressure
- To adjust and set oil delivery rate the unit must be
pressurized and air must be flowing through the unit. Turn the sight dome,
located on the top of the unit, counter clockwise to initiate oil delivery. If
flow increases or decreases, the oil delivery rate will increase or decrease
proportionally. Turning the sight dome clockwise will stop all oil delivery.
- maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
250 PSIG
(17.2 bar) and
32°F
to
150°F (0°C to 65.5°C)
|
|
|
| Size |
SCFM |
With Transparent Bowl |
With Metal Bowl |
| Part # |
Part # |
| 3/4" |
196 |
L30-06A |
L30-06AMB |
| 1" |
374 |
L30-08A |
L30-08AMB |
SCFM ratings at 120 PSIG inlet pressure.
|
- 26 oz. bowl
- transparent bowl: no drain
metal bowl: manual brass petcock drain
- can be filled under pressure
- The rate of oil delivery may be controlled by turning the adjusting screw counter
clockwise for more and clockwise for less oil delivery. The oil delivery rate will change automatically to
deliver more oil during higher air flows and less oil for air flows lower than the one at which the setting
was made.
- maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F (0°C to 65.5°C)
|
|
|
| Size |
SCFM |
With Transparent Bowl |
With Metal Bowl |
| Part # |
Part # |
| 1-1/4" |
927 |
L40-0AA |
L40-0AAMB |
| 1-1/2" |
927 |
L40-0BA |
L40-0BAMB |
| 2" |
1186 |
L50-0CA |
L50-0CAMB |
SCFM ratings at 120 PSIG inlet pressure.
|
- 26 oz. bowl
- transparent bowl: solid bottom
- metal bowl: manual drain with sight glass
- full view sight dome
- adjustable oil feed
- can be filled under pressure
- quick-disconnect clamp ring for easy bowl removal
- The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and
clockwise for less oil delivery. The oil delivery rate will change automatically to deliver more oil during
higher air flows and less oil for air flows lower than the one at which the setting was made.
maximum operating conditions:
- transparent bowl:
150 PSIG
(10.3 bar) and
32°F
to
125°F
(0°C to 52°C)
- metal bowl:
200 PSIG
(13.8 bar) and
32°F
to
150°F (0°C to 65.5°C)
|
FRL’s are designed for air
service only, unless otherwise indicated.
SCFM ratings at 120 PSIG inlet pressure.
