Dixon In-Line Lubricators
Description:
In-Line Lubricators and Replacement Parts
Coupling Category
Air Fittings
Manufacturer
Dixon Air Fittings
Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor. Installation is recommended within 25 feet of the tool to be lubricated. Refer to the arrow for proper air flow direction. Transparent sight disc allows visual inspection of oil level. Oil flow regulated by screwdriver screw adjustment. Minimum flow rate is 30 SCFM.Not recommended for constant flow applications. For reciprocating tools only.
Type of oil to use: Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. |
NPT Sizes | Oil Capacity |
Max. Working Pressure at ambient temperature (70°F) |
Air Flow at 70 PSI |
Aluminum Part # |
1/2" | 1.4 fluid ozs. | 500 PSI | 30 SCFM | PL300 |
3/4" | 3.7 fluid ozs. | 200 PSI | 70 SCFM | PL400 |
3/4" | 11.0 fluid ozs. | 300 PSI | 70 SCFM | PL400L |
1" | 16.0 fluid ozs. | 250 PSI | 100 SCFM | PL500 |
Replacement Parts
Description | Part # |
(A) oil adjustment valve assembly | 851661 |
(B) valve gasket | 452531 |
(C) fill plug | 452525 |
(D) fill plug O-ring | 700013-214 |
(E) sight disk | 452532 |
(F) sight disk seal | 700013-016 |
(G) sight disk lock nut | 452533 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |