Dixon Sand Blast Couplings
Description:
Quick Couplings - Nozzle Holders - Threaded Couplings
Coupling Category
Air Fittings
Manufacturer
Dixon Air Fittings
Sand blast couplings are designed for use on sand blast hose.
Installation:
1) Ends of hose must be cut square to fit snug against metal end.
2) Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180° from first to insure best centering.
3) After all screws have been placed, check tube opposite screws to be sure screws have not penetrated completely through.
4) On quick couplings, insert safety clips.
- Supplied with screws
- Nozzle Holders have 1-1/4" NPSM thread
- Rated to 110 PSI at ambient temperature (70°)
- Abrasive blasting equipment must have hose safety cables or hose coupling safety locks.
Installation:
1) Ends of hose must be cut square to fit snug against metal end.
2) Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180° from first to insure best centering.
3) After all screws have been placed, check tube opposite screws to be sure screws have not penetrated completely through.
4) On quick couplings, insert safety clips.
Quick Couplings | |||
Hose Size (in) | Hose OD (in) | Brass Part # | Aluminum Part # |
3/4 | 1-1/2 | BSB75 | ASB75 |
1 | 1-7/8 | BSB100 | ASB100 |
1-1/4 | 2-5/32 | BSB125 | ASB125 |
1-1/2 | 2-3/8 | BSB150 | ASB150 |
|
|||
Hose Size (in) | Hose OD (in) | Brass Part # | Aluminum Part # |
3/4 | 1-1/2 | BNH75 | ANH75 |
1 | 1-7/8 | BNH100 | ANH100 |
1-1/4 | 2-5/32 | BNH125 | ANH125 |
1-1/2 | 2-3/8 | BNH150 | ANH150 |
Threaded Couplings | ||
Size (in) | Brass Part # | Aluminum Part # |
1-1/4 | BSC125 | ASC125 |
1-1/2 | BSC150 | ASC150 |
Replacement Parts | |
Part # | Description |
SBG | black nitrile replacement gasket |
USBG | urethane replacement gasket |
SBCS | replacement screw |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |