Dixon Strap-Grip Saddles and Fittings

Description:

Saddles Only - Male NPT - Boss Lock Type C Coupler - Type E Adapter

Coupling Category

Cam and Groove

Manufacturer

Dixon Cam and Groove Fittings

  •  Strap-Grip is designed to provide greater resistance to end pull than conventional band clamps alone.
  •  Only the fittings shown below are designed for use with Strap-Grip Saddles.
  •  Saddles are sold in pairs and designed for use with 3/4" or 5/8" wide bands.
  •  Bands must be purchased separately.
  •  Band clamps should first be applied to the OD to seal the hose. Then Strap-Grip saddles should be banded over the initial clamp to anchor the fitting in the hose.


Saddles only
Size Hose OD Plated Iron 
from to Part #
1 1/2" 1-13/16" 2-1/8" SGS150
2" 2-5/8" 3" SGS200
3" 3-1/2" 3-7/8" SGS300
4" 4-9/16" 5-1/8" SGS400
6" 6-1/2" 7-1/16" SGS600
8" 1   8-5/8" 9-3/8" SGS800
1  items will be discontinued as inventory is depleted


Male NPT x Hose Shank
Size Schedule 40
Plated Carbon Steel
Schedule 40
Stainless Steel  
Schedule 80 1
Plated Carbon Steel
Part #  Part #  Part # 
1-1/2" LP21 ... LP21-80
2" LP26 ... LP26-80
3" LP36 RLP36 2 ...
4" LP46 RLP46 2 ...
6" LP66 ... ...
1  Schedule 80 stems meet NFPA 58
2  tubular steel


Boss-Lock type C coupler x hose shank
Size 316 Stainless
Part #
1" RC100CEZ
1 1/2" RC150CEZ
2" 1   RC200CEZ
3" 1   RC300CEZ
1   items will be discontinued as inventory is depleted


type E - adapter x hose shank
Size 316 Stainless
Part #
2" RE200C
3" RE300C
Dixon Strap-Grip Saddles and Fittings
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov