Q-Line Ferrules - 14WQ
Description:
Q-Line Ferrules - 14WQ
Coupling Category
Q-Line / Sanitary Couplings
Manufacturer
Bradford
Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets,
with proper installation of ferrules, assembly of joints and absence of shock pressure.
All ratings shown are dependent upon related components within the systems and proper installation.
For temperatures above 250°F, we recommend using only 13MHP clamps.
This information is only valid if Bradford™ clamps, ferrules and gaskets are used.
I-Line uses a male and female type connection which makes alignment easier.
Add a gasket from a number of elastomers and a special wing nut or bolted clamp to complete the connection.
This design has been preferred by the beverage industry for many years.
Dixon Sanitary offers a wide variety of I-Line fittings in 304 and 316L materials in sizes from 1" to 8".
All ratings shown are dependent upon related components within the systems and proper installation.
For temperatures above 250°F, we recommend using only 13MHP clamps.
This information is only valid if Bradford™ clamps, ferrules and gaskets are used.
I-Line uses a male and female type connection which makes alignment easier.
Add a gasket from a number of elastomers and a special wing nut or bolted clamp to complete the connection.
This design has been preferred by the beverage industry for many years.
Dixon Sanitary offers a wide variety of I-Line fittings in 304 and 316L materials in sizes from 1" to 8".
| Tube O.D. | Dimensions | 304 Part Number | 316L Part Number | ||
| A | B | C | |||
| 1" | 1.000 | .870 | .531 | 14WQ-G100 | --- |
| 1½" | 1.500 | 1.370 | .563 | 14WQ-G150 | --- |
| 2" | 2.000 | 1.870 | .813 | 14WQ-G200 | 14WQ-R200 |
| 2½" | 2.500 | 2.370 | .938 | 14WQ-G250 | 14WQ-R250 |
| 3" | 3.000 | 2.870 | .938 | 14WQ-G300 | 14WQ-R300 |
| 4" | 4.000 | 3.834 | 1.000 | 14WQ-G400 | 14WQ-R400 |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |